T-shirt Battle City

After the topics on Habré about the powerboy and dendy decided to ponder and pumped emulators. Ran for the joystick, played.
I didn’t stop at that: I ordered a sega-console joystick on the unit.
And now I made myself a Battle City t-shirt.

We drive in Yandex “Battle City” and immediately find the right picchu with the splash screen. But the picture is very small (not suitable for application. You need to know what the font used.
Go to whatthefont download the picture. It turns out like this:

Predict service letters, click on the arrow. Voila! This is the font font arcade by pizzadude. We find it in the network, swing.

Now, we look better at the drawing - it consists of two colors: white and orange.
Option two:
1. Drawing only for white T-shirts (FFFFUUU) - raster
2. Drawing for any T-shirt - Vector
Choose the second option.

In Korela I use the downloaded picture as a substrate. I print letters, stretch a little and adjust to fit:

Do not pay attention that the letters are blue. So it is more convenient - do not strain your eyesight.
')
Letters are ready. Now we need to deal with the bricks and the white layer.
When printing with a vector, the device cuts off a sheet of film, the operator puts the film on the T-shirt, slaps it with a hot press several times if necessary.
So you need to make the right “sandwich” of letters so that everything will turn out beautifully:
1. Solid orange letters and a white “mesh” on top.
Not exactly a good option. The mesh is thin and can tear.
2. Solid white letters and bricks on top.
Here is the option at the time;)
Select all the letters, copy. Now on the design layout we have:
the substrate of the picture, the letters are white, the letters are orange.

To draw each brick is a long matter, so we will proceed more easily.
Draw a piece of wall:

To knock it out of orange letters. After some operations and corrections we get:
Completely white letters and orange bricks.

For printing I use the service printprint. Because Color T-shirts are available for application.
After moderation, diz becomes available in the constructor for use;)

References:
Intermediate version with mesh
Final, revised layout
Protoprint
Rega in the system
T-shirt itself