📜 ⬆️ ⬇️

Firmware new Nokia s60 or Hacking new Nokia firmware

Firmware new Nokia s60 or Hacking new Nokia firmware
image
XXX: What does hacking give us?
YYY: This allows a lot: from easy installation of any software that requires a signature, to modifying ROM files without flashing the phone! and many more many charms.
To begin with, the idea is not mine, but it was very difficult for the Internet manuals to read and run a lot on different sites links. And so I decided to share with you how I went through this difficult path with my manual. I would also like to note that no one except you is responsible for the accidentally * dead * phone does not carry.

I myself am the happy owner of the Nokia N97 mini and all the manipulations will be done specifically on this model (the difference of other models in one step, will be described below)

AHTUNG SAVE ALL THE NECESSARY DATA FROM THE PHONE, during the firmware process all data from the phone memory will disappear !!!
')
ATTENTION FASHION ONLY FOR YOUR VERSION FIRMWARE !!!

Let's start, the first thing we need is the firmware for the device itself (I recommend Dimonvideo - registration is needed because all the necessary file replacements have already been made), and there you can find modifications to the firmware in the discussion thread of the firmware, for example the mod for N97mini to which I attached a lot effort, and thanks to Vet-ra for implementing the mod.

Brave and Those who want to personally modify the firmware I will not describe here personally, because there is a manual for blondes in pictures.

We continue, download JAF 1.98.62. We install , delete all the shortcuts created by JAF from the desktop, then ATTENTION IF the XP axis is then download JAF_1.98.65_final and deal with the manual in the archive. If the axis is seven, then download JAF_Rebuild_2.0 and install it. For these models, use the ini file . For these models, use the ini file . Put it in the JAF installation folder (for example, c: \ program files \ odeon \ JAF). Remove all programs related to Nokia, let's say PCSute, and set a single driver for all Nokia phones: NCCD 7.1.27.0
To avoid problems, disable antiviruses, and launch the desktop shortcut on behalf of the administrator in XP compatibility mode, I carried out all the manipulations on Win7 x64.

If all of the above is done, and nothing is swearing, then go ahead.
At the moment there is a hack for the following models:
e51 v400
e52 v31
e75 v202
N86 v21
N97 mini v11
N97 v21
5800 v40
Unpacking the firmware along the path C: \ Program Files \ Nokia \ Phoenix \ Products \ RM-XXX \ (Instead of a C drive, it may be different. Unpack it where the firmware program is installed!) Where RM-XXX should correspond to your model.

FURTHER OPERATIONS ONLY DO WITH DIRECT HANDS AND ON A SOBER HEAD
Run JAF as mentioned above and configure it as shown in the picture below.
image
everything should be exactly like in the picture, after you put a tick on Use ini, the program will offer you to choose your phone (what is your phone and RM-XXX we look under the battery) look at the screen
image
JAF will download the firmware files as in the screenshot.
image
If everything is the same as on the screenshots FURTHER READ MORE CAREFULLY:
1. Turn off the phone
FURTHER WILL TAKE THE SECOND OPTION IF DOESN'T ROLL OUT WILL TAKE THE THIRD
(2. Press the FLASH button in JAF and once press the phone power button (do not hold it!)
JAF will start the firmware process)
3. Turn off the device, take out the battery, insert it back, DO NOT turn on the phone
Press the FLASH button, a warning appears
Click OK in the warning and immediately insert the USB into the device
If the firmware process does not go, and the Windows started installing firewood, after the installation of the firewood is completed, repeat step 3 until the firmware process begins.
4. When the firmware is finished, you will receive a phone with ROMPatcher Plus preinstalled.
Now swing patches. We put them in E: \ Patches on your smartphone, launch ROMPatcher +, use them and set them to autostart.
Now your smartphone has been successfully hacked!
(but so far only up to the first format ... after that you will have to reinstall the smartphone again ...)

This has been fixed in fashion and with firmware with modified firmware we can tick the first step so, ONLY IF YOUR FIRMWARE IN THE TELEPHONE COMES WITH THE VERSION VERSION, the data and settings in the phone will not be lost and after a hard reset the hacking will remain
image
BUT IT IS STRONGLY RECOMMENDED TO PUT THE Factory SET (ONLY FOR MODIFIED FIRMWARE) ONLY, and format the built-in flash memory (if any) and the memory card, again to avoid further problems.

Like this all, successful hacking.

Source: https://habr.com/ru/post/87278/


All Articles