Mini-Z construction
At the beginning, I want to express my gratitude to all Habr's readers who are interested in information about Mini-Z radio-controlled cars. At the request of blog readers publish one more material:
Just want to note that the Mini-Z, as a rule, comes assembled in its entirety. You just have to buy batteries. “That's enough to feel the whole drive from piloting this little car!”
')
The speed of the standard Mini-Z out of the box is 18-20 km / h. To turn the Mini-Z into a serious sports car for competition, I recommend reading the material published under the heading Tuning Mini-Z or follow the links under each item of the below review separately.
I would like to get acquainted with the Mini-Z design using the example of the rear-wheel drive chassis of the Mini-Z Racer MR-02 RM and MR-02 LM series with electronics operating in the ASF 2.4 GHz frequency band (see the post What is Mini-Z? )
1) Tires (... more about Tires )
2) Bushings or wheel bearings . The wheel is attached to the axle with a nut (... more about the bearings )
3) Battery terminals . Some kits are equipped with gold-plated terminals for better conductivity
4) Battery cover
5) Connector for programming electronics via a computer or a special programmer (... more about Electronics programming )
6) Batteries size AAA (... more about batteries )
7) Wheels . In a standard set of plastic (... more about Wheels )
8) Collector engine 130-class (... more about Engines )
9) Leading gear made of plastic. It is put on the engine shaft. The standard set has 4 plastic gears - 6, 7, 8, 9 teeth (... more about Gears )
10) Satellite differential with a driven gear from delrin 44 teeth (... more about Differential )
11) Shock absorber rear suspension (... more about Shock Absorbers )
12) Receiver antenna
13) Plastic steering rack (... more about Front suspension settings )
14) Cover mounting the rack . To replace the steering rack does not need to disassemble the entire body of the model, you just need to open the cover.
15) The body (skeleton) chassis of plastic. Optionally, you can change the standard gray case on the case of multi-colored transparent plastic (black, pink, green or just transparent)
16) T-shaped plate mounting rear suspension of plastic (... more about the rear suspension )
17) Motororama plastic (... more about the rear suspension )
18) Plastic body mounting plate . Optionally you can buy plates of titanium or aluminum
19) Knuckle . (... Read more about Front suspension settings )
20) Shock absorber (spring) front suspension. Optionally, you can purchase springs with different stiffness.
21) Groove for fixing the body model
View of the electronic inside the housing Mini-Z:
For more information, please visit the Russian Mini-Z Club website.
The design of the chassis of the radio-controlled car Mini-Z Racer series from Kyosho
Just want to note that the Mini-Z, as a rule, comes assembled in its entirety. You just have to buy batteries. “That's enough to feel the whole drive from piloting this little car!”
')
The speed of the standard Mini-Z out of the box is 18-20 km / h. To turn the Mini-Z into a serious sports car for competition, I recommend reading the material published under the heading Tuning Mini-Z or follow the links under each item of the below review separately.
I would like to get acquainted with the Mini-Z design using the example of the rear-wheel drive chassis of the Mini-Z Racer MR-02 RM and MR-02 LM series with electronics operating in the ASF 2.4 GHz frequency band (see the post What is Mini-Z? )
1) Tires (... more about Tires )
2) Bushings or wheel bearings . The wheel is attached to the axle with a nut (... more about the bearings )
3) Battery terminals . Some kits are equipped with gold-plated terminals for better conductivity
4) Battery cover
5) Connector for programming electronics via a computer or a special programmer (... more about Electronics programming )
6) Batteries size AAA (... more about batteries )
7) Wheels . In a standard set of plastic (... more about Wheels )
8) Collector engine 130-class (... more about Engines )
9) Leading gear made of plastic. It is put on the engine shaft. The standard set has 4 plastic gears - 6, 7, 8, 9 teeth (... more about Gears )
10) Satellite differential with a driven gear from delrin 44 teeth (... more about Differential )
11) Shock absorber rear suspension (... more about Shock Absorbers )
12) Receiver antenna
13) Plastic steering rack (... more about Front suspension settings )
14) Cover mounting the rack . To replace the steering rack does not need to disassemble the entire body of the model, you just need to open the cover.
15) The body (skeleton) chassis of plastic. Optionally, you can change the standard gray case on the case of multi-colored transparent plastic (black, pink, green or just transparent)
16) T-shaped plate mounting rear suspension of plastic (... more about the rear suspension )
17) Motororama plastic (... more about the rear suspension )
18) Plastic body mounting plate . Optionally you can buy plates of titanium or aluminum
19) Knuckle . (... Read more about Front suspension settings )
20) Shock absorber (spring) front suspension. Optionally, you can purchase springs with different stiffness.
21) Groove for fixing the body model
View of the electronic inside the housing Mini-Z:
For more information, please visit the Russian Mini-Z Club website.
Source: https://habr.com/ru/post/63110/
All Articles