Overburning or how to stuff an unburned

This article will tell you how to get out if there is a 730 MB video file, a cd-disk, and the recording had to be made the day before yesterday.
Many probably encountered the problem of a very large file and a very small disk. If we are talking about a video file, the solution is more than simple. VirtualDub - this program will allow you to cut unnecessary ads, titles, split video into 2 files, etc. Swing, unpack, cut and enjoy.

Important:

• Set the checkbox Video-> Direct stream copy.
• Set the checkbox Audio-> Direct stream copy.
• If an error occurs (could not locate decompressor for "..."), when opening a video file, you must install or reinstall DivX 5.05 Pro . In 95% of cases it helps.
• How to mark the area to cut? In the program at the bottom right, the last 2 buttons.
  You can also use the Edit-> Set selection start, Set selection end menu to start the selection and end, respectively. You can also simply press Home and End on the keyboard.

We cut out all the captions, all the unwanted advertising, everything that could prevent us from getting satisfaction from the film, but the padlocks (I apologize for my French) the file still weighs 703-715 MB. This is where the Overburning function, which has been used for a long time (from version 5.5) in the Nero, Easy CD Creator and WinOnCD software package, will help us.

On the CD-R, in addition to the area designated for recording data, there is a section in which the manufacturer places service information (disk volume, material of the active layer, etc.) - the so-called ATIP, and, reading the ATIP using any program (for example, CDR Identifier, Nero Info Tool, Feurio), you can find out the amount of data that the disc manufacturer guarantees to record. Any CD-R that is free from defects can hold at least 1 MB of “extra” data. Most often it is 1–6 MB more than that indicated on the package, sometimes more.

')
1. How do I know if my drive supports overburning?
Nero Burning Rom -> Recorder (Recorder) -> Select recorder (Select Recorder) and look at the Re-Burn item. It should be written "Supported."
2. How to find out how much space you can burn to disk?
Nero CD-DVD Speed ​​-> Extra (optional -> Overburning Test. Insert the disc, select the speed, set the desired number of minutes (In the Test Capacity field, set the video time when calculating 1 min ~ 8.7 MB) press Start and wait until Test appears. After the test, you can save the data to the Nero database. I advise you to perform Write Simulation first to be completely sure (if the drive supports Burn Proof or Just Link mode, you must disable these modes to perform Write Simulation ). The data are valid only for this discs, they can not be distributed even on disks of this type.
3. How to enable the overburn feature?
Nero Express / Burning Rom -> Options -> Expert Properties -> Allow Disc-at-once CD overburning (set a maximum of 99 minutes for all cases)

IMPORTANT: Since disks are usually not designed for this amount of data, there may be errors at the end of the disk. Damage to the recorder is also possible (with a slight jolt during recording). Use this feature at your own risk!

This is all that I wanted to tell you. Good luck!

UPD. 1) Everything that’s true for a CD is also true for a DVD in this article. 2) I in no way encourage anyone to store information on disks.