Ed Leedskalnin - Perpetual Motion Demonstration

Description...

Quotes from the Magnetic Current Booklet Brochure - Ed Leedskalnin , translated from www.skif.biz :
"Take an iron or mild steel rod, one and a half inches in diameter, bend it in the shape of U
each prong a foot long, and three inches between the prongs, make two coils of copper or aluminum six inches long and large enough to put on the rod.
Wind 1500 turns of insulated copper wire, size 16, onto each coil. Place them as close to the fold as possible. Connect the battery to the coils so that each current creates a north and south pole at the upper ends of U. Now you have an electric magnet. ”

“Place a six-inch square cross-section rod on top of the two iron teeth U, fit tightly so that it lies flat.
Connect the battery with an electric magnet for a short time, now disconnect the battery, connect the light bulb with the electric magnet in the same way that it was connected to the battery, now pull out the six-inch bar, do it quickly, and you will see the light in the light bulb, connect the battery again With an electric magnet, place the bar on the iron barbs, hold it so slightly, unplug the battery. Now the electric magnet keeps the eternal movement of the magnetic flux. If you do not interfere, it will continue indefinitely. I held the structure in this position for six months, and when I removed the six-inch bar, I received as much light as the first time. This experiment shows that if you launch the northern and southern individual magnets into orbit, they will never stop. ”

In his book there is a lot of amusing things with illustrations, on skif.biz only the bare text.
The original can be found on torrents or viewed online .
Website with an additional description of Ed Leedskalnin