📜 ⬆️ ⬇️

Yealink Meeting Server 2.0 - New Video Conferencing Features

In the last article: Yealink Meeting Server - a comprehensive solution for video conferencing, we described the functionality of the first version of the Yealink Meeting Server (hereinafter referred to as YMS), its capabilities and structure. As a result, we have received from you many requests for testing this product, some of which have grown into complex projects for the creation or modernization of the VCS infrastructure.
The most common scenario was to replace the previous MCU with the YMS server, while maintaining the existing fleet of terminal devices, and expanding it with the Yealink terminals.

There are three main reasons for this:

  1. The scalability of an existing MCU is impossible or unnecessarily expensive.
  2. “Accumulated debt” for technical support is commensurate with the cost of a modern turnkey VKS solution.
  3. The manufacturer leaves the market and support ceases to be carried out altogether.

Many of you who have come across a Polycom upgrade, for example, or LifeSize support, will understand what this is about.
')
New functionality Yealink Meeting Server 2.0, as well as updating the range of terminal clients Yealink does not allow to fit all the information in one article. Therefore, I plan to make a series of small publications on the following topics:


What's new?


For the current year, the system received several significant updates, both in the functionality and in the licensing scheme.


The first steps




The server’s main page offers to enter either the user interface or the admin control panel.

The first entry is made from under the admin.



When you first start, a step-by-step installation wizard is displayed, which allows you to configure all the necessary modules of the system (hereafter we will consider in more detail).

The first step is to activate the license. In version 2.0, this process has undergone some changes. If earlier it was enough to simply install the license file that was tied to the MAC address of the network controller of the server, now the procedure is already divided into several steps:

  1. It is necessary to download the server certificate (* .tar), which Yealink provides, through a representative - through us, for example.
  2. In response to the certificate import, the system creates a request file (* .req)
  3. In exchange for the request file, Yealink sends the license key / keys
  4. These keys, in turn, are installed via the YMS interface, and activate the required number of symmetric connection ports, as well as the Broadcast license pack - if applicable.



In order. Import certificate in the License section of the home page.

To export the request file, go to the link “Your license has not been activated. Please activate . And call the window "Offline Activation License"



The exported request file is sent to us, and we give you one or two activation keys (for each type of license, a separate one).

License files are installed through the same dialog box.

As a result, the system displays the status and number of competitive connections for each type of license.



In our example, the license test and have an expiration date. In the case of the commercial version - they are unlimited.

The YMS interface has several translation options, including Russian. But the basic terminology is more commonly perceived in English, so I will use it for screenshots.

The admin home page displays brief information about active users / sessions, the status and number of licenses, as well as the system information of the hardware server and the version of all software modules.

After installing the licenses, you need to make the initial configuration of the server - you can use the assistant.



In the Network Association tab, we set the domain name of the YMS server - the name can be real or fictitious, but it is necessary to further configure the terminals. If it is not real - then in the settings on the clients the domain name is driven into the server address, and the real IP of the server is entered into the address of the proxy.

The Time tab contains the SNTP and time zone settings - this is important for the correct operation of the calendar and distribution.

Data Space - control and limiting of disk space for various system needs, such as logs, backups and firmware.

SMTP Mailbox - mail settings for mailings.

The new version of YMS has a useful feature - Number Resource Allocation .
Previously, the internal numbering of YMS was fixed. This could create difficulties with integration with IP PBX. In order to avoid intersections and create your own flexible numbering, you need to configure for each group that can be called through numeric dialing.



It is possible not only to change the digit capacity of numbers, but also to limit the intervals. This is very convenient, especially when working with existing IP-telephony.

For the full operation of the YMS server, you need to add the necessary services.



The subsection SIP Service adds basic services to work using SIP-connection. In fact, adding is reduced to a few simple steps in each tab - you need to call the service, choose a server (in cluster mode), a network adapter and, if necessary, edit the connection ports.

Registration Service - responsible for registering Yealink terminals

IP Call Service - making calls

Third Party REG Service - registration of third-party hardware terminals

Peer Trunk Service and REG Trunk Service - integration with IP PBX (with and without registration)

Skype for Business - integration with a server or S4B cloud (more details in separate article)

Further, in a similar way, you need to add the necessary services in the subsection H.323 Service , MCU Service and Traversal Service .

After the initial setup, you can proceed to registering accounts. Since this functionality has hardly changed during the update process and was described in the last article, we will not dwell on it.

Detailed setting and customization


We’ll touch upon the Call Control Policy configuration a bit - there are several useful options here.



For example, Display native video is the display of your own video in conferences.

iOS push address - allows you to receive pop-up notifications on iOS devices with Yealink VC Mobile installed.

Broadcasting interactive - allows you to connect to the participants-viewers, with the activated license "Broadcast".

RTMP live and Recording - includes broadcasting and recording of conferences. But it is important to remember that each recording / translation not only additionally loads the server, but also uses the full license for one competitive connection. This should be taken into account when calculating the port capacity of the server and the number of licenses.

Video Display Policy - display settings.



Finally, consider the “Customization” submenu .



In this section, you can customize the YMS interface for your corporate style. Adapt the mailing list template and IVR record.

Many graphical modules of the interface support the replacement with the user version - from the background and logo to system messages and screensavers.

Conclusion


The administrator interface is concise and intuitive, despite the fact that with each update acquires additional functionality.

I don’t see any point in demonstrating the interface of the active video conference in this article - the quality is still at a high level of video conferencing systems. It is better not to think about such subjective things as quality and convenience, it is better to test it yourself!

Testing


Deploy Yealink Meeting Server in your infrastructure for testing! Screw in your telephony and existing SIP / H.323-terminals. Try working through a browser or codec, through a mobile or desktop application. Add to the conference voice participants and viewers in the mode "Broadcast".

To get the distribution and test license, you just need to write a request to me at: 1@stss.ru
Email subject: Testing YMS 2.0 ( your company name )
It is necessary to attach a card of your company to the letter in order to register the project and create a demo key under you.
In the body of the letter, I ask you to briefly describe the task, the existing HFV infrastructure and the planned scenario of using the HQS.

Given the number of requests for testing and a slightly complicated procedure for obtaining a key, there may be a delay in response. Therefore, I apologize in advance if we do not succeed in replying to you on that very day!

I express my gratitude to the company IPMatica for:


Thanks for attention,
respectfully
Kirill Usikov ( Usikoff )
Head of
CCTV and video conferencing systems
Subscribe to notifications about promotions, news and discounts from our company.

Help me collect useful statistics - go through two short surveys.
Thanks in advance!

Source: https://habr.com/ru/post/431944/


All Articles