Raise3D 3D Printer Review

What are we talking about

Raise3D is one of the fastest growing Chinese companies producing 3D printers, we recently wrote about going to their factory. The company produces three models of 3D printers of different sizes, in versions with one and two extruders, as well as software for them.



In this article, we will look at the Raise3D model range and share our printing experience on these devices.
')

Models

Raise3D N1

Construction area: 205x205x205 mm
Platform heating: up to 110 ° C
Extrusion temperature: up to 300 ° C
Double extruder: optional
Materials: most plastics used in 3D printing, including PLA, ABS, PC, PETG, HIPS, NinjiaFlex and others.
Price: from 165 000 rubles

All printers of a model range print with a standard plastic filament with a section of 1,75 mm. You can use any plastic with a print temperature of up to 300 ° C.



The device is based on a durable aluminum frame with a durable coating and steel guides.



4-point spring platform position adjustment greatly simplifies calibration.



Uploading files is possible via WIFI, LAN, USB and SD-flash. Management and indication is carried out through the full-color seven-inch touch display.



The printer is optionally completed with a double extruder for two-material printing - you can print plastic models of two colors or with soluble supports.



Print resolution is up to 10 microns in the Z axis and up to 12.5 in the X and Y axes.



It is possible to continue printing interrupted due to a power outage or for other reasons - the model will not be damaged.

Raise3D N2

Construction area: 305x305x305 mm
Platform heating: up to 110 ° C
Extrusion temperature: up to 300 ° C
Double extruder: optional
Materials: most plastics used in 3D printing, including PLA, ABS, PC, PETG, HIPS, NinjiaFlex and others.
Price: from 225 000 rubles

The main differences from the first model: the increased volume of the camera - the ability to print products up to 30.5 centimeters in size on each side.



Factory pre-calibrated platform. More convenient location of the control touch panel.



The remaining characteristics are similar to the N1, including a printing chamber that is completely closed to drafts and temperature drops, and an on-board computer convenient for a future upgrade — everything is the same.

Raise3D N2 Plus

Construction area: 305 × 305 × 610mm
Platform heating: up to 110 ° C
Extrusion temperature: up to 300 ° C
Double extruder: optional
Materials: most plastics used in 3D printing, including PLA, ABS, PC, PETG, HIPS, NinjiaFlex and others.
Price: from 315 000 rubles

Raise3D N2 Plus differs from Raise3D N2 in one parameter - the working area doubled vertically. It can print objects up to 61 centimeters tall. This can be very useful when there is a need to print something large, and there is no desire or time to glue the model together from its component parts.

Typing

We printed trial models: orange - on N2, one material, and two-color - on N2 Plus.











You can see the details.



The control panel is convenient, fact.



It turned out quite well from the first time.



The task is complete, the printer tells us, remove the models from the platform.





And a little exterior.



Yes, they also look good - quite an industrial design.



The door closes tightly to avoid temperature extremes. This improves print quality.





Employee for scale.

Total

We liked the printers. When you first turn on the difficulties did not arise - the platform is calibrated in advance, the control panel interface is fairly simple and intuitive, the devices themselves are designed so that the filling of the material and maintenance are not difficult. Good build - nowhere backlash, no squeaks. I would like to separately emphasize the appearance - the printers look good in the interior of the office or laboratory. One of the main advantages, of course, is the impressive volume of the N2 Plus printing chamber — you can create quite large things.

When you buy Raise 3D printers in Top 3D Shop, you get free consumables - 10 plastic coils with N2 and N2 Plus and five with N1, delivery and training for working with a printer.

Want more interesting news from the world of 3D technology?

Subscribe to us in the social. networks: