Ultimaker 2+: Apple's recognition and beautiful introduction of "racouche" from a simple engineer
About the new chips of the latest model Ultimaker and a tale about how an engineer through the forum gained fame and recognition.
Apple approved Ultimaker as the sole supplier of 3D printers in the Apple Online Store. Ultimaker 2+ is now available for purchase from Apple online stores in the UK, Ireland, France, Germany, the Netherlands, Belgium and Luxembourg
Ultimaker initially paid a lot of attention to working with the community. And the Cura editor is open source, and the forum is lively and interesting.
')
Recently, they announced an upgrade to their Ultimaker 2 and Ultimaker 2 Extended models (about which I wrote earlier) - Ultimaker 2+ and Ultimaker 2+ Extended, respectively.
In 2014, a simple guy on the forum laid out his version of the print head for Ultimaker 2, then the dialogue with the community and orders went, but now these are the official components of a well-known brand. Let's see how a peasant went to success (900+ records of forum discussions, by the way).
The process of unpacking a 3D printer, has already been described in detail by suppliers.
From updates:
Upgrade or plastic feed mechanism
He became bigger and added a button for unclamping the feeder. Now, if the plastic "zazhuet", then it can be easily pulled out. The feed mechanism works a little louder, but the feed goes very smoothly.
New blowing system
As evidence of the usefulness of innovation - "ear test":
Now the ears of the robot are the same clarity. On the previous printer model, the left “ear” of the robot “flowed” a little due to insufficient airflow.
Mobile application for Android and Appstore
The application has instructions, useful tips, answers to questions, as well as the opportunity to find the official representative of the company for technical support.
Video as always fascinates
Olsson block - practical synergy
Olsson block is a hot end with interchangeable nozzles of various diameters. Allows you to quickly change the nozzle. There are 4 nozzles in total - 0.13 mm, 0.4 mm, 0.6 mm and 0.8 mm. By changing the nozzles you can achieve the best print result for you. The company Ultimaker officially placed Olsson block in the list of its accessories.
3dtoday.ru/blogs/igo3d-russia/olsson-block-in-all-countries-ultimaker-step-by-step
The first post October 7, 2014
“Hi!
Homemade filament lately homemade made um2 nozzle a bit too quickly ...: shock:
Removing the nozzle
For the sensor and the heater.
In fact, it doesn’t even fix the heater.
Since it is still hot, it has not been so hot.
So lately I have been a better design.
I found it was the E3D-V6.
It was a thinnest water heater.
Here is the result:
: smile:
It wasn’t even a way forward. This works smoothly. ”
The next day posted a more detailed photo
After another couple of days - shemki
A couple more days - a vidos with a test print
Then send the drawings
And comparative "nozzle studies"
Photos of fresh samples
And waiting for the delivery of the first batch
The postman brought a long-awaited package to the customer, he shares his joy on the forum (February 2015)
Someone else happiness rolled
Installation instructions for the upgraded hotband
Temperature tests
Are discussing
“The blocking of the hole is the original and the Olsson block are equally deep, as the swordriff says.
It is a little bit more space for the nozzle-thread. “This meant that I’m getting a little bit more.” The developer commented.
After 1200 hours of printing
Offer their designs blowing
And holivar rushed. “Import substitution” is said to be not real, and in terms of quality with the original, it cannot yet.
With a nozzle of 0.2, for example, neither in China nor in China, until it went wrong:
You can look at the real Ultimaker 2+ in the office of official representatives in Russia .
Apple approved Ultimaker as the sole supplier of 3D printers in the Apple Online Store. Ultimaker 2+ is now available for purchase from Apple online stores in the UK, Ireland, France, Germany, the Netherlands, Belgium and Luxembourg
Ultimaker initially paid a lot of attention to working with the community. And the Cura editor is open source, and the forum is lively and interesting.
')
Recently, they announced an upgrade to their Ultimaker 2 and Ultimaker 2 Extended models (about which I wrote earlier) - Ultimaker 2+ and Ultimaker 2+ Extended, respectively.
In 2014, a simple guy on the forum laid out his version of the print head for Ultimaker 2, then the dialogue with the community and orders went, but now these are the official components of a well-known brand. Let's see how a peasant went to success (900+ records of forum discussions, by the way).Printer
The process of unpacking a 3D printer, has already been described in detail by suppliers.
From updates:
Upgrade or plastic feed mechanism
He became bigger and added a button for unclamping the feeder. Now, if the plastic "zazhuet", then it can be easily pulled out. The feed mechanism works a little louder, but the feed goes very smoothly.
New blowing system
As evidence of the usefulness of innovation - "ear test":
Now the ears of the robot are the same clarity. On the previous printer model, the left “ear” of the robot “flowed” a little due to insufficient airflow.
Mobile application for Android and Appstore
The application has instructions, useful tips, answers to questions, as well as the opportunity to find the official representative of the company for technical support.
Video as always fascinates
We look at the magic
Olsson block - practical synergy
Olsson block is a hot end with interchangeable nozzles of various diameters. Allows you to quickly change the nozzle. There are 4 nozzles in total - 0.13 mm, 0.4 mm, 0.6 mm and 0.8 mm. By changing the nozzles you can achieve the best print result for you. The company Ultimaker officially placed Olsson block in the list of its accessories.
3dtoday.ru/blogs/igo3d-russia/olsson-block-in-all-countries-ultimaker-step-by-step
Chronicle
The first post October 7, 2014
“Hi!
Homemade filament lately homemade made um2 nozzle a bit too quickly ...: shock:
Removing the nozzle
For the sensor and the heater.
In fact, it doesn’t even fix the heater.
Since it is still hot, it has not been so hot.
So lately I have been a better design.
I found it was the E3D-V6.
It was a thinnest water heater.
Here is the result:
: smile:
It wasn’t even a way forward. This works smoothly. ”
The next day posted a more detailed photo
After another couple of days - shemki
A couple more days - a vidos with a test print
Then send the drawings
And comparative "nozzle studies"
Photos of fresh samples
And waiting for the delivery of the first batch
The postman brought a long-awaited package to the customer, he shares his joy on the forum (February 2015)
Someone else happiness rolled
Installation instructions for the upgraded hotband
Temperature tests
Are discussing
“The blocking of the hole is the original and the Olsson block are equally deep, as the swordriff says.
It is a little bit more space for the nozzle-thread. “This meant that I’m getting a little bit more.” The developer commented.
After 1200 hours of printing
Offer their designs blowing
Russian and Chinese options
And holivar rushed. “Import substitution” is said to be not real, and in terms of quality with the original, it cannot yet.
With a nozzle of 0.2, for example, neither in China nor in China, until it went wrong:
You can look at the real Ultimaker 2+ in the office of official representatives in Russia .
Source: https://habr.com/ru/post/391219/
All Articles