As the "Pilot" upgraded the fiscal registrar in Fujitsu CCT
Surely, you read a lot about the landmark amendments to the Law 54-FZ "On the use of cash registers", obliging domestic stores to report in real time about the sales, transferring data on settlements with customers via the Internet to the Federal Tax Service of the Russian Federation. The changes affected almost all retailers (except for a small list of exceptions specified in the text of the amendments), even those who had previously worked under the simplified tax system.
In detail about the essence of the law and its impact both on stores and on ordinary customers, the Pilot group of companies wrote in its blog . Now we will clearly demonstrate how the cash registers (CCP) need to be upgraded according to the requirements of 54-. Interested please under the cat.
Let's show it on the example of cash registers (CCP) POSprint FP510-F . The FP510 printer from Fujitsu produced in Japan was taken as the basis for the printing device. By the way, this device proved its reliability - for 6 years of sales by Pilot of equipment based on this printing device, there were practically no failures: once the company’s specialists recorded a component failure (power converter on the printer’s motherboard) and a contact was diagnosed several times thermal head plume failure, eliminated by simply twisting the loop.
For the appearance of the CCP POSprint FP510-F, a software upgrade of the KKM POSprint FP510K model is required, which consists in changing the firmware and replacing the electronic control tape of the protected (EKLZ) with a fiscal drive (FN) or preparation from scratch, that is, from the printer.
')
Consider the second method. Take the printer Fujitsu FP510
Printers come from the manufacturer without an interface board with a plug (bracket)
Removing the cap
We install on it a fiscal module with preinstalled software
Install the fiscal drive on the module
We place the assembly inside the case, fix it with a screw, paste the warranty labels. With the help of a special utility, we diagnose connection interfaces, assign a factory number.
CCP is ready for use.
It would seem that everything is simple and nothing prevents retailers from purchasing the equipment necessary for compliance with the requirements of FZ-54. However, there is a clear problem: the deficit, or the marriage of fiscal drives. Under an agreement with the manufacturer, prepaid FNs must be received by customers within 60 days. In fact, this period is significantly increased. And this means that not all retailers will have time to register their CCP - and by law they must do this before July 1, 2017.
If we talk about who uses POSprint FP510-F in CCT, these are such large networks as Atak, Auchan, Detsky Mir, Il De Bote, Letual, Bershka, Lefties, Massimo Dutti, Oysho, Pull & Bear, Stradivarius, Zara, Zara Home, etc.
In detail about the essence of the law and its impact both on stores and on ordinary customers, the Pilot group of companies wrote in its blog . Now we will clearly demonstrate how the cash registers (CCP) need to be upgraded according to the requirements of 54-. Interested please under the cat.
Let's show it on the example of cash registers (CCP) POSprint FP510-F . The FP510 printer from Fujitsu produced in Japan was taken as the basis for the printing device. By the way, this device proved its reliability - for 6 years of sales by Pilot of equipment based on this printing device, there were practically no failures: once the company’s specialists recorded a component failure (power converter on the printer’s motherboard) and a contact was diagnosed several times thermal head plume failure, eliminated by simply twisting the loop.
For the appearance of the CCP POSprint FP510-F, a software upgrade of the KKM POSprint FP510K model is required, which consists in changing the firmware and replacing the electronic control tape of the protected (EKLZ) with a fiscal drive (FN) or preparation from scratch, that is, from the printer.
')
Consider the second method. Take the printer Fujitsu FP510
Printers come from the manufacturer without an interface board with a plug (bracket)
Removing the cap
We install on it a fiscal module with preinstalled software
Install the fiscal drive on the module
We place the assembly inside the case, fix it with a screw, paste the warranty labels. With the help of a special utility, we diagnose connection interfaces, assign a factory number.
CCP is ready for use.
It would seem that everything is simple and nothing prevents retailers from purchasing the equipment necessary for compliance with the requirements of FZ-54. However, there is a clear problem: the deficit, or the marriage of fiscal drives. Under an agreement with the manufacturer, prepaid FNs must be received by customers within 60 days. In fact, this period is significantly increased. And this means that not all retailers will have time to register their CCP - and by law they must do this before July 1, 2017.
If we talk about who uses POSprint FP510-F in CCT, these are such large networks as Atak, Auchan, Detsky Mir, Il De Bote, Letual, Bershka, Lefties, Massimo Dutti, Oysho, Pull & Bear, Stradivarius, Zara, Zara Home, etc.
Source: https://habr.com/ru/post/330486/
All Articles