How to assemble an electric bike in seven days

For a very long time and often on the channel I was asked to show how to assemble "such a thing" by myself. Especially after the publication " On electricity before the Crimea ." Therefore, when building a new project, a volitional decision was made to photograph everything on camera and then provide the suffering in a civilized form. Strong-willed, because there are only two hands, just a pair of eyes, and it’s very difficult to keep track of where the camera is looking, and where the drill has already run away. It also increased time costs, especially after. I actually collected the rollers even longer than the ebike itself. Well, okay, all the burden is over, meet:

Day One: crafting a frame from a semi-designer

Day two: we sort out the plug, set it in the frame, throw in the steering wheel and brake

Day three: we change the bearings of the front hub, disassemble and diagnose the state of the MK after 15.000km, we also change the bearings in it, insert it into the frame

Day four: we think over the laying of wires, the location and mounting of the controller

Fifth day: small things, pedal seat

Sixth day: we invent and manufacture fastenings of a full-sized wing to horizontal dropouts so that it does not require dismantling when removing the wheel. We design and cook batteries, set the light

Day Seven: test the result