Microsoft Xbox One Complete Parsing
So, today we continue to acquaint you with the consoles of the new generation. After a successful review of the PlayStation 4, it was the turn of the new device from Microsoft. Xbox One went on sale on November 22, and Microsoft already reports about a million consoles sold per day. The previous generation of the console came out 8 years ago, in 2005. A total of 80 million consoles were sold, Microsoft will continue to release Xbox 360 until 2015.
Xbox One supports 4K resolution and 7.1 sound.
')
The console package includes a power supply, a Kinect 2.0 controller and a gamepad. The lucky ones who bought the prefix from the first installment will notice the inscription "Day One 2013" on the gamepad. Probably in the distant future, such gamepads will be sold at auction for fabulous sums. A Microsoft representative said that the development of a new gamepad has exceeded the cost of $ 100 million. There were prototypes with screens, cameras, odor cartridges and even with a built-in projector.
██ Power Connector
██ HDMI input and output
██ Digital Optical Audio Output
██ Two USB 3.0 ports
██ Kinect Connector
██ IR out and LAN
Also worth noting that on the side there is another USB 3.0.
Sticker on the bottom of the console
The side grille snaps on and resembles that of the Xbox 360 .
The plastic case itself keeps on snaps.
The first under the analysis gets the WiFi controller.
██ Marvell Avastar 88W8897 2x2 MIMO Wi-Fi combo 802.11ac radio, NFC, Bluetooth and Wireless Display chip
██ Marvell Avastar 88W8782U WLAN SOC w / USB 2.0
The speaker is mounted on plastic latches.
The metal case is held on 64 mm Torx screws.
An additional point for maintainability Xbox One gets for using the standard SATA connector for Blu-ray / DVD drive.
Chips on the drive
██ Microsoft MS0DDDSPB1 1326-BTSL ATNGS501
██ Texas Instruments 37T AVY7
Inside the console is a standard 2.5 ”HDD.
Samsung Spinpoint M8 ST500LM012 500 GB, 5400 RPM, 8MB cache, SATA II.
The disk is divided into five NTFS partitions.
The RF module for wireless communication is attached to the front of the case.
The radiator is fixed with torx-screws with a metal crosspiece.
112-mm fan keeps on plastic snaps. Thanks to the simple mounting of the radiator and the Xbox One fan, it gets additional points of easy maintainability.
Components on the board
██ X887732-001 DG3001FEG84HR (AMD "Jaguar" 8-core CPU + AMD Radeon GPU)
██ 16x SK Hynix H5TQ4G63AFR 4 GB DDR3 SDRAM
██ X861949-005 T6WD5XBG-0003
██ SK Hynix H26M42003GMR 8 GB eMMC NAND Flash
██ ON Semiconductor NCP4204 GAC1328G Integrated Power Control IC
██ Realtek RTL 8151GNM Ethernet Controller
██ Texas Instruments TPS2590 3-V to 20-V
Specialists from iFixit put the new Xbox 8 out of 10 possible points (the higher the score, the easier the repair). It is worth noting that the console is easily disassembled, much simpler than the Xbox 360. The modular design is quite simply arranged, which makes it easy to change components.
Also on the site iFixit you can see the analysis of the new controller Kinect 2.0.
Specifications
- CPU - 8-core x86-x64 CPU APU 1.75 GHz
- GPU - AMD Radeon GPU as part of the APU, based on the AGCN-architecture with 12 compute modules, which have 768 cores; D3D 11.2 @ 1,23 TFLOPS
- RAM —2 memory types: DRAM and ESRAM. The volume of DDR3 is 8 GB (2133 MHz) (only 5 GB are used, since the remaining 3 GB is limited to the needs of operating systems). ESRAM capacity - 32 MB. RAM capacity is 68.3 Gb / s.
- Hard disk - 500 GB, non-removable, it is possible to connect an external hard disk
- Blu-ray and DVD drive
- Kinect 2.0 controller. High definition camera - 1080p. Face Recognition. IR sensors increase the quality of shooting and allow you to shoot in the dark
- 3 USB 3.0 connectors and two HDMI (input and output)
- Wired Gigabit Ethernet (1 Gb / s), Wireless Wi-Fi (IEEE 802.11 a / b / g / n, IEEE 802.11ac)
Xbox One supports 4K resolution and 7.1 sound.
')
The console package includes a power supply, a Kinect 2.0 controller and a gamepad. The lucky ones who bought the prefix from the first installment will notice the inscription "Day One 2013" on the gamepad. Probably in the distant future, such gamepads will be sold at auction for fabulous sums. A Microsoft representative said that the development of a new gamepad has exceeded the cost of $ 100 million. There were prototypes with screens, cameras, odor cartridges and even with a built-in projector.
██ Power Connector
██ HDMI input and output
██ Digital Optical Audio Output
██ Two USB 3.0 ports
██ Kinect Connector
██ IR out and LAN
Also worth noting that on the side there is another USB 3.0.
Sticker on the bottom of the console
- Model 1540, developed by Microsoft, Redmont, Washington, USA.
- "Greetings from Seattle"
- The console was made on October 14, 2013.
The side grille snaps on and resembles that of the Xbox 360 .
The plastic case itself keeps on snaps.
The first under the analysis gets the WiFi controller.
██ Marvell Avastar 88W8897 2x2 MIMO Wi-Fi combo 802.11ac radio, NFC, Bluetooth and Wireless Display chip
██ Marvell Avastar 88W8782U WLAN SOC w / USB 2.0
The speaker is mounted on plastic latches.
The metal case is held on 64 mm Torx screws.
An additional point for maintainability Xbox One gets for using the standard SATA connector for Blu-ray / DVD drive.
Chips on the drive
██ Microsoft MS0DDDSPB1 1326-BTSL ATNGS501
██ Texas Instruments 37T AVY7
Inside the console is a standard 2.5 ”HDD.
Samsung Spinpoint M8 ST500LM012 500 GB, 5400 RPM, 8MB cache, SATA II.
The disk is divided into five NTFS partitions.
- Temp Content: 44 GB, 27.1 GB available (the console has never been included).
- User Content: volume 391.9 GB
- System Support: 42.9 GB, 34.1 GB available.
- System Update: 12.8 GB, 11.8 GB available.
- System Update 2: 7.52 GB, 7.47 GB available.
The RF module for wireless communication is attached to the front of the case.
The radiator is fixed with torx-screws with a metal crosspiece.
112-mm fan keeps on plastic snaps. Thanks to the simple mounting of the radiator and the Xbox One fan, it gets additional points of easy maintainability.
Components on the board
██ X887732-001 DG3001FEG84HR (AMD "Jaguar" 8-core CPU + AMD Radeon GPU)
██ 16x SK Hynix H5TQ4G63AFR 4 GB DDR3 SDRAM
██ X861949-005 T6WD5XBG-0003
██ SK Hynix H26M42003GMR 8 GB eMMC NAND Flash
██ ON Semiconductor NCP4204 GAC1328G Integrated Power Control IC
██ Realtek RTL 8151GNM Ethernet Controller
██ Texas Instruments TPS2590 3-V to 20-V
Specialists from iFixit put the new Xbox 8 out of 10 possible points (the higher the score, the easier the repair). It is worth noting that the console is easily disassembled, much simpler than the Xbox 360. The modular design is quite simply arranged, which makes it easy to change components.
Also on the site iFixit you can see the analysis of the new controller Kinect 2.0.
Source: https://habr.com/ru/post/203450/
All Articles