📜 ⬆️ ⬇️

Pulid F13 - FHD screen and 4 core MT6589T

image

We have not come across Pulid phones before. Today we are testing a top version from this manufacturer - a model called Pulid F13.

Specifications

image Screen: 5 ", 1920x1080, IPS.
image Chip: Mediatek MT6589T (Cortex-A7 1.5GHz, 4 cores)
image Video accelerator: PowerVR SGX544
image Operating system: Android 4.2.1
image RAM: 2GB
image Permanent memory: 32GB + microSD slot with card support up to 32 GB
image Camera: Front 5MP, rear - 13MP
image Connectivity: 2 sim cards (GSM + WCDMA), GPS, Bluetooth, Wifi (802.11 b / g / n)
image Battery: 2500mAh
image Dimensions: 142 x 72 x 9 mm

Before us is a classic Chinese representative with top features: a 5-inch screen with FHD resolution, overclocked 4-core MT6589T with a frequency of up to 1.5 GHz, 2 GB of operational memory and 32 GB of permanent memory.
')

Appearance and equipment

The phone comes in a compact box:
image

The package is wide: the phone itself, headphones, charger, USB cable, a second 2500 mAh battery, protective film and a cover.
image

Fasten the phone in the case with velcro:
image

Externally, the design is similar to one well-known phone model:
image

Behind a slightly different location of the camera and flash:
image

The small Power button is on the right:
image

Volume rocker - left:
image
The buttons are conveniently located, and unlike the Lenovo P780, they can be used without intercepting the phone.

There is only a 3.5mm headphone jack on top:
image
microUSB input is located below.

Next to the physical button “Home” there are 2 sensory - “Menu” and “Back”:
image

Speaker and front camera:
image

Under the back cover is already quite the expected form: a battery, 2 slots for SIM-cards, a slot for microSD cards.
image

SIM cards work in the “standby” mode, both can take a call, but when talking on one card, the second one will be unavailable. The second microSIM card.

Screen


The Pulid F13 is equipped with a 5-inch screen with a resolution of 1920x1080. The manufacturer does not specify whether it is made using OGS technology or not, but judging by the thin frames and excellent viewing angles - this screen is made using OGS technology when the touchscreen and protective glass are one piece, with no air gap in the middle.
Screen with excellent color reproduction:
image
image

The resolution at 1920x1080 does not allow to see pixelation on icons .:
image

Viewing angles without distortion:
imageimage
imageimage

Despite the large size of 5 inches, the phone in your hand is comfortable:
image

Wifi

The Wifi signal level through one wall is already nearing the yellow zone of the Wifi Analyzer:
image
In practice, this makes it possible to use Wifi in the next room with a router, after a couple of walls the signal level will drop dramatically.

GPS

GPS is mediocre, a cold start takes about 4-5 minutes. To help determine the direction of motion on the map has a built-in compass:
imageimage

Camera

The resolution of the rear camera is 13Mp, but from this she did not begin to shoot better. In complex scenes, it is lost, but with the right lighting, the pictures are normal:
image

Front camera resolution - as much as 5Mp. Removes a good idea (as for the front), but without autofocus:
image

Video shoots at a resolution of 1280x720, 30fps. For dynamic scenes poorly suited:


But for shooting pets will fit:


Games

The phone is productive and can run most 3D games. But due to the high resolution of the screen in difficult scenes, a drop in fps can be observed.
Video launch of several 3D games:


Software

Pre-installed Android 4.2.1 without “decorations” and “enhancements”:
imageimageimage

Performance

The Pulid F13 is built on a 28 nm Mediatek 6589T chip, which consists of a 4-core Cortex-A7 processor architecture with a frequency of up to 1.5 GHz and a PowerVR SGX544 video accelerator. The amount of permanent memory - 32GB, operational - 2GB. The amount of permanent memory in 32GB is power! You can install as many games, applications, upload movies and music. You just forget about the memory card slot!
MT6589T is the overclocked version of MT6589, the processor frequency was raised from 1.2 GHz to 1.5 GHz. Let's see how the overclocked chip affected the performance of the phone:
Antutu 3.4:
imageimageimage

Quadrant:
imageimageimage

The test results of Vellamo in the processing speed of HTML 5 occupy the 3rd place in the device rating:
image

Nenamark 2:
image

In general, the results are higher than those of the MT6589, but still the performance of the graphics subsystem decreases due to the FHD screen.

work time

Antutu Battery Tester test results:
imageimage
The results are about 35 points higher than those of iOcean X7 with a 2000 mAh battery. But Pulid at F13 increased the maximum frequency of the processor at 300 MHz. But probably the whole thing is not only in this, but also in some "error" in the characteristics of the battery.
In practice, this implies 1 day of active use, or 2-3 days in the "easy" mode - calls and Wifi.

Pros and cons


image Good performance
image Great screen with a resolution of 1920x1080 pixels
image 2 sim cards
image Poor GPS reception
image Average rear camera quality
image Short battery life

The phone was pleasantly surprised by its good performance and excellent screen. Is that the price a little "bites."

Price

In China, this smartphone is priced at $ 290 including shipping.
If the screen with FHD resolution seems to you overkill - the manufacturer has a model called Pulid F17. Another design, a screen with a resolution of 1280x720 and the same platform - MT6589T, 2GB of RAM and 32GB of constant. The price is around $ 249.99.

If you do not have an account on Habrahabr, you can read and comment on our articles on BoxOverview.com

Source: https://habr.com/ru/post/188918/


All Articles