Overview FLOWMASTER

This review focuses on the basic model FLOWMASTER. Here we will tell about the features of its appearance, connection and use.





Contents of delivery
• transmitter (transmitter);
• receiver (receiver);
• two power supplies (for transmitter and receiver);
• two coasters (for transmitter and receiver);
• remote control;
• HDMI cable;
• infrared transmitter.
')


Appearance and Interfaces



The transmitter and receiver are rectangular with rounded corners. Dimensions of each 148 * 97 * 18mm. The case is plastic; on the left side of the transmitter and receiver, a pattern is applied under the transparent glossy panel. On the right are the ventilation holes.



Transmitter Front - network and video indicators, code button. Rear - HDMI-input connector for the power supply, connector for an infrared transmitter.



Receiver. Front - network and video indicators, infrared sensor. Rear - HDMI-input connector for the power supply.

Specifications
• signal transmission standard - WHDI 1.0;
• interface - HDMI 1.3;
• signal delay time ≤ 1ms;
• range of action - up to 30 m;
• video format support - up to 1920 * 1080p @ 60Hz;
• audio format support - DOLBY DIGITAL, DTS, PCM, LPCM.

Features of FLOWMASTER
• supports all devices with HDMI;
• transmits a signal through obstacles (including through walls);
• the signal of the player’s remote control is transferred to control it;
• you can use several transmitters with one receiver (alternately).

Connection
Our device for those who:
• Has the desire to connect a player to the TV from the next room
• Wants to hide the player in a closet or niche
• Dreaming to position the video source closer to the sofa, while the TV hangs on the opposite wall
• Does not want to buy, connect, pull long wires and make holes in the wall

Transmitter - to the player



Install the transmitter on the stand. We connect a DVD player / media player or any other video source with an HDMI connector to the transmitter using an HDMI cable. We connect the IR transmitter to the transmitter and position it in front of the player's IR sensor. Connect the transmitter to the network.

Receiver - to TV



The receiver is installed on the stand, we connect the HDMI cable to the TV. We connect the receiver to the network.

Using

Turn on all devices. Select the video input from the TV menu to which the FLOWMASTER is connected. After 10-15 seconds, an image appears.



Thanks to the IR transmitter, the player can be controlled (even if it is located behind a wall or in a cabinet) by using its usual remote control.



Select the desired movie. Format up to 1920 * 1080p @ 60Hz.
Slight heating of the device is permissible and does not affect the quality of its work.



Network creation: two transmitters + one receiver

Complicate the task. We take the second transmitter, connect to the computer, which is located in the bedroom. Add a new device to the network is very simple. In the menu of the FLOWMASTER receiver, select the item “Add new video source”.



The message “Please register on the transmitter” appears on the screen. To start the registration of the transmitter, you must press the code button on it. A minute later, the receiver will find a new transmitter and remember it. Like selecting a video input on the TV, the desired transmitter is selected.



We can watch movies or play: the image is excellent, there is no delay, the walls are not a hindrance.

Conclusion
FLOWMASTER will be very useful for those:
• who wants to separate video equipment in different places;
• who wants to connect a computer (which is in another room) with a TV;
• who needs to connect video equipment with a projector.

Organizing space in the house has become easier.

Be hip! Be habr!