IPhone 5 disassembly and some design differences from previous iPhone models

Immediately after the start of the parsing of the iPhone 5, we noticed serious structural differences from previous models. And almost all of these differences were in a positive direction.

Display module

First: the display module is removed first. This is very important if only because the replacement of the display after the unsuccessful fall of the iPhone is the most common reason for opening all the devices.
')

Connector locking screens

Secondly: all the loops are now not just latched and glued, but also fixed on top with metal screens. This, of course, gives more reliability from “releasing” the connectors at the moment of falling or hitting.

Screens on the board

Thirdly: all the screens on the board are soldered tightly. If earlier almost all screens could be clicked off, now you need to unsolder them. This is very inconvenient in the repair process. And not only because of wasting time, but also because of the danger of overheating something.

More of the nice buns

The dimensions of the polyphonic and auditory speakers are increased in size. And this parameter, as you can guess, can significantly affect the quality and volume of the sound.

As already known, the system connector of the iPhone 5 is far from what it was before. In the new connector there is no top and bottom - you can insert as you like. Well, this, in turn, will save from classical connector breakdowns with a “crooked” connection.

The rest of the apparatus, as the apparatus. For more information on the internal device, see the video .



Those interested can watch the analysis of all previous Apple iPhone models, including the CDMA model: iPhone 2G , iPhone 3G , iPhone 4 , iPhone 4S , iPhone 4 CDMA , iPhone 5 .

You can follow the news on the GTV channel Vkontakte .