Hide USB-Flash to 3.5 "diskette
If after all previous projects you have left behind free floppy disks, then this Friday project for making stylish USB-Flash media using 3.5 "floppy disks is for you.
')
So, for the manufacture of the case will need two floppy 3.5. inches The thickness of a single floppy is not enough to fit a USB flash drive. You also need a soldering iron and USB cable, we will solder it to the contacts of the card.
The process is primitive: remove the case of the flash card, disassemble the floppy disk, solder the contacts, paste the flash card into the floppy disk, assemble the floppy disk, run in any order.
The final result:
PS: An improved model from one diskette. Complete manufacturing process.
The author of the idea and photos: Charles Mangin .
Source: Overlook and Flickr
')
So, for the manufacture of the case will need two floppy 3.5. inches The thickness of a single floppy is not enough to fit a USB flash drive. You also need a soldering iron and USB cable, we will solder it to the contacts of the card.
The process is primitive: remove the case of the flash card, disassemble the floppy disk, solder the contacts, paste the flash card into the floppy disk, assemble the floppy disk, run in any order.
The final result:
PS: An improved model from one diskette. Complete manufacturing process.
The author of the idea and photos: Charles Mangin .
Source: Overlook and Flickr
Source: https://habr.com/ru/post/141991/
All Articles