Update Kaspersky Rescue Disk - update
Hello!
Earlier there was already a topic . As practice has shown, some utility liked, but the developer has updated grub on the disk - and as a result the old version became inoperative.
Who needs - updated utility . Use.
')
As usual, the manual is simple.
All actions must be performed on a deliberately uninfected machine connected to the Internet.
1. Download the Kaspersky Rescue CD image from here: rescuedisk.kaspersky-labs.com/rescuedisk/updatable
2. Unzip the utility archive into some empty folder. There also place the disk image downloaded in step 1.
3. Run diskupdt.cmd from the folder and wait for the utility to run.
4. The updated disk will be located in the folder with the addition of “new” in the file name. This image must be written to an empty blank disc, and then booted from it and perform a scan.
This utility works as Kaspersky Rescue CD version 10 (current at the moment), and with the old, eighth version. It is strongly recommended to use the current version, but if for some fantastic reason you don’t like it, you can update version 8 disk. The script distinguishes them by name: kav_rescue_10.iso and kav_rescue_8.iso, therefore, it is strongly not recommended to rename the downloaded original files . You can re-update previously updated images, renaming them to the above names, but it is extremely important not to confuse the numbers and not to name, for example, the eighth version of the tenth. In the opposite case, the drive will be broken, although the upgrade procedure may be successful.
Earlier there was already a topic . As practice has shown, some utility liked, but the developer has updated grub on the disk - and as a result the old version became inoperative.
Who needs - updated utility . Use.
')
As usual, the manual is simple.
All actions must be performed on a deliberately uninfected machine connected to the Internet.
1. Download the Kaspersky Rescue CD image from here: rescuedisk.kaspersky-labs.com/rescuedisk/updatable
2. Unzip the utility archive into some empty folder. There also place the disk image downloaded in step 1.
3. Run diskupdt.cmd from the folder and wait for the utility to run.
4. The updated disk will be located in the folder with the addition of “new” in the file name. This image must be written to an empty blank disc, and then booted from it and perform a scan.
This utility works as Kaspersky Rescue CD version 10 (current at the moment), and with the old, eighth version. It is strongly recommended to use the current version, but if for some fantastic reason you don’t like it, you can update version 8 disk. The script distinguishes them by name: kav_rescue_10.iso and kav_rescue_8.iso, therefore, it is strongly not recommended to rename the downloaded original files . You can re-update previously updated images, renaming them to the above names, but it is extremely important not to confuse the numbers and not to name, for example, the eighth version of the tenth. In the opposite case, the drive will be broken, although the upgrade procedure may be successful.
Source: https://habr.com/ru/post/124320/
All Articles