Setting Yota Many
Alexey boomburum wrote a good review of Yota Many . But he did not touch his interface, and this caused a lot of controversy. In fact, the new Yota is rich in settings.
If you connect to Yota Many via Wi-Fi with the password indicated on the box (and the device) and the same MAC address, you can access the administrative panel of the gadget simply by typing status.yota.ru in the browser line. Inquiring minds will easily guess that the device sends them to “their” ip-address: 10.0.0.254
Also “Sizam” will open if you are connected via USB. This will work on Windows, Mac, and Linux without any additional drivers. I will tell you more about the new implementation of the device connection interface in the upcoming review of the Yota One.
When you go to status.yota.ru, you see the following image:
')
Since I am connected via USB, I see that my battery is charging (the display is animated).
The first step is to set the administrator password:
Next we are waiting for the tab "Wi-Fi settings":
You can change the name of the "access point" so that no one can guess what kind of gadget you have.
But I didn’t change, it seemed to me funny that the copy in the title that I got contains my nickname - “E0”.
You see the available encryption types:
Ability to manually select one of 7 Wi-Fi channels.
Ability to change the password Wi-Fi. Makes insolvent all insinuations about the insecurity of the device.
Need to use HEX characters and numbers. Minimum length 10 characters.
Well, Wi-Fi auto-off, I think, should be turned off. It is nice to login to Many, even if you are out of coverage. Maybe you're in a bunker, urgently change your password before going to the surface.
I consider the settings to be exhaustive. Is that the illumination can not be disabled for the Stealth-mode and battery saving.
Ps.
Everything is available in Russian, you see the ability to switch on each screenshot.
But I used to work with technology in English. Configuring VPNs in DD-WRT should nod their approval.
If you connect to Yota Many via Wi-Fi with the password indicated on the box (and the device) and the same MAC address, you can access the administrative panel of the gadget simply by typing status.yota.ru in the browser line. Inquiring minds will easily guess that the device sends them to “their” ip-address: 10.0.0.254
Also “Sizam” will open if you are connected via USB. This will work on Windows, Mac, and Linux without any additional drivers. I will tell you more about the new implementation of the device connection interface in the upcoming review of the Yota One.
Immediately make a reservation that the default Wi-Fi does not work if you are out of coverage Yota.
When you go to status.yota.ru, you see the following image:
')
Since I am connected via USB, I see that my battery is charging (the display is animated).
The first step is to set the administrator password:
Next we are waiting for the tab "Wi-Fi settings":
You can change the name of the "access point" so that no one can guess what kind of gadget you have.
But I didn’t change, it seemed to me funny that the copy in the title that I got contains my nickname - “E0”.
You see the available encryption types:
- Open network
- WEP
- WPA-AES
- WPA-TKIP
- WPA2 - AES (default)
- WPA2 - TKIP
Ability to manually select one of 7 Wi-Fi channels.
Ability to change the password Wi-Fi. Makes insolvent all insinuations about the insecurity of the device.
Need to use HEX characters and numbers. Minimum length 10 characters.
Well, Wi-Fi auto-off, I think, should be turned off. It is nice to login to Many, even if you are out of coverage. Maybe you're in a bunker, urgently change your password before going to the surface.
I consider the settings to be exhaustive. Is that the illumination can not be disabled for the Stealth-mode and battery saving.
Ps.
Everything is available in Russian, you see the ability to switch on each screenshot.
But I used to work with technology in English. Configuring VPNs in DD-WRT should nod their approval.
Source: https://habr.com/ru/post/123055/
All Articles