We disassemble the connector pci-e (psu) or molex

I was faced with the task of disassembling the pci-e power connector for vidyuhi (so it subscribes to the power supply), but in general the method is also suitable for molex connectors and many others. At first I tried to disassemble it with a needle, then with small tweezers, but it didn’t lead to a completely broken connector. In the article I will tell you about tools for parsing connectors, where to buy them and how to use them.

And I ordered the Molex Cable Connector Metal Pin Remover Extractor PSU toolkit on ebay.com. The tool arrived and I knew happiness, look at the pictures how easily and naturally the connector disassembles.

Set of tools:


')
The tool we are interested in for parsing the connector:



We stick one pip on one side of the pin:



We stick on the other side of the pin the same pip:





Voila, the green wire with a pin is pulled out with a flick of the wrist:



Pin has two antennae, which do not allow him to leave the connector, and with our simple actions we bent them to pull it out, if you can bend the antenna back, you can safely insert the pin into the connector and it will be like new: