Instructions (!) For Android firmware in NAND HD2

Good evening everyone. Yes, I, of course, know that there are already two posts about the Android memory stitched into NAND-memory on HD2, but both are pass-through / notification, and one did not get to the main one at all. Here I offer complete instructions, carefully translated and verified, because Many people, even on holidays, are too lazy to poke around in the bourgeois forums and understand "what a new ... new year it won't start."

So let's get started. First of all we need:
1. Version of the radio module with support for 576 RAM . ^*
2. Installed HSPL 2.08 , we will not flush without it.
3. Downloaded and unpacked into any empty folder MAGLDR 1.11 .
4. Downloaded and unpacked into any empty NANDroid folder. <sup>**
* Ride any, older than 2.08.
** You can download this one . And even better - this one , the second to begin with - the most it. There is also a stock Desire (faster than the HD-shnaya), but you will have to rut yourself.</sup>

It is also worth noting that we will not have to flash the original version of the firmware, any will come if only it had HSPL 2.08 and a version of the radio module that supports 576 RAM .
')
Actually, that's all. You can start the entertainment program.

1. Synchronize the phone via activesync or WMDC using a standard USB-cord
2. Open the folder where we unpacked MAGLDR
3. Run ROMUpdateUtility.exe as administrator
4. Twice we agree to all risks and liability, click "next"
• This is checking usb connection
5. Click "update"
6. Check the image that will be stitched (the name should be 2.00.000.0)
7. Click "next" twice
8. The phone will go into bootloader mode and slowly flash.
9. After flashing, the phone will restart itself. The first stage is over.

Intermission, you can go to drink / smoke / relax. What have we achieved at this stage? Sew a custom bootloader that starts after the main one and can launch Android, which we will fill in the main memory immediately after the break. By the way, the break is over.

• After a reboot, if you did everything correctly in the first part of the Marlezonsky ballet, the phone itself will launch MAGLDR
1. Navigation is carried out using the volume control buttons, as well as “pick up the phone” and “hang up the phone”
2. Having mastered the control, go to Option 4: USB Flasher , then select the item by pressing "pick up" (leftmost button)
3. The phone will go into Android firmware mode, install USB drivers if they are not already there.
4. (on the computer) Open the folder into which we unpacked NANDroid , run DAF.exe as administrator
5. Read, agree, click "next"
6. Then everything will go without our participation. The flasher will flood the Android build into the phone, the phone will reboot, in 10-15 minutes you will already have a working Android in the phone's memory.
This, in fact, the instruction is over. Questions are welcome, as I arrive I will add some of them to the post, if they repeat / are relevant. Thank you all for your attention.

Once again links, just in case
MAGLDR: one , two , three
Firmware: times
HSPL: one , two

UPD1: About HSPL and firmware / sync you can also read in my last post.
UPD2: Factory WinMo easily returns to its rightful place, just download the stock firmware, pull the battery in, hold the volume down and load the mattress mode. After - flash, as usual, sew.
UPD3: For those who chose the first assembly (cyanogen): Download the fix , unpack it on a memory card. In the phone, open the console, run the following commands:
$ SU
rm -f /system/lib/modules/*
cp -f /sdcard/hotfix/* /system/lib/modules
rm -rf /sdcard/hotfix
rm -rf /sdcard/gscript/fix.sh
UPD4: For everyone who wants to get Sense 2 (Like Desire HD) - is.gd/jYIIg sew this assembly.
UPD5: For those who completed UPD4 - do not forget to reboot the phone right after the first boot and initial installation a couple of times. (Booted, reboot, booted, reboot).
UPD6: For users of the license Navitel: you can convert your key into the android version (1 time) navitel.su/support/re-registration
UPD7: Stock Desire-firmware, works faster, than from DHD, but the root must be done independently.