Coasters of rare breed
Greetings Recently, I wrote about the unusual metal devices for laptops - simple cooling coasters from the company LUXA2 (brand Thermaltake). Stylish and generally pleasant things, but not everyone needs them - not everyone has a laptop, that is.
But now one cannot find a person without a phone - today there is a small story in pictures about several compact mounts, including for telephones. I saw them in the office of the company when I drove the supports mentioned above.
')
Last time I talked about the company itself - this time it’s just to remind you that the company makes stylish accessories for the most part only for Apple products, but there are no restrictions for other devices. So let's start, perhaps, with the LUXA2 Mobile Holder H4 - a special stand for the iPad.
This time the device looks no less predatory - on a massive aluminum leg there is a movable metal stand. Her "tentacles" (which carry out the necessary fixation) can be moved and moved apart, adjusting the space under the device.
The hinge looks more than reliable and has several degrees of freedom - it will be very easy to position the gadget as needed. Workmanship is beyond praise.
The stand itself on a hinge rotates 360 degrees around its axis, another 300 it can be tilted in different directions (vertically).
The manufacturer’s website talks about support for the iPad and the Kindle DX e-book, however, nothing will prevent you from using any other reader or photo frame - the mount is fairly universal. But the iPad looks like this:
You can install H4 in two ways - so that the inscription on the leg is visible, or similarly to iMac:
The weight is only 443 g. The price is not yet known exactly, but most likely it will be 1500-2000 rubles. On the one hand, it is quite expensive for a stand ... on the other hand, even the most helpless iPad case is at least twice as expensive.
Not to do a separate topic, I will add a post with photos of fastenings for mobile phones. It is not only the iPhone that gets involved - every employee had such office in the office and the iPhone was not in any of the stands)
There are two versions - one [ LUXA2 H1-Touch ] also with a movable mechanism (more versatile and reliable):
The second [ LUXA2 H2 ] is simpler - a rubber gasket is applied to a part of its body, which holds the phone due to the friction force. Not so reliable, but it works. This is, for example, the HTC HD2:
Also on the site there is a model for mounting in the car, but in reality I have not seen it and can not say anything about it. But I think it will be more pleasantly frankly Chinese fixtures, which are crowded with all the shops and markets.
Well, that’s probably all :) My iPad, but I don’t use any attachment with it - I always wear it in an EeePC case, where it fits perfectly with the documents. But for the phone, something would have to be invented, but it is always incomprehensible where it is lying around. But for a netbook I have been using the Ergotron stand for more than a year now - judging by the number of questions in PM, I’ll have to write about it too.
Thank you for your attention and success!
But now one cannot find a person without a phone - today there is a small story in pictures about several compact mounts, including for telephones. I saw them in the office of the company when I drove the supports mentioned above.
')
Last time I talked about the company itself - this time it’s just to remind you that the company makes stylish accessories for the most part only for Apple products, but there are no restrictions for other devices. So let's start, perhaps, with the LUXA2 Mobile Holder H4 - a special stand for the iPad.
This time the device looks no less predatory - on a massive aluminum leg there is a movable metal stand. Her "tentacles" (which carry out the necessary fixation) can be moved and moved apart, adjusting the space under the device.
The hinge looks more than reliable and has several degrees of freedom - it will be very easy to position the gadget as needed. Workmanship is beyond praise.
The stand itself on a hinge rotates 360 degrees around its axis, another 300 it can be tilted in different directions (vertically).
The manufacturer’s website talks about support for the iPad and the Kindle DX e-book, however, nothing will prevent you from using any other reader or photo frame - the mount is fairly universal. But the iPad looks like this:
You can install H4 in two ways - so that the inscription on the leg is visible, or similarly to iMac:
The weight is only 443 g. The price is not yet known exactly, but most likely it will be 1500-2000 rubles. On the one hand, it is quite expensive for a stand ... on the other hand, even the most helpless iPad case is at least twice as expensive.
Not to do a separate topic, I will add a post with photos of fastenings for mobile phones. It is not only the iPhone that gets involved - every employee had such office in the office and the iPhone was not in any of the stands)
There are two versions - one [ LUXA2 H1-Touch ] also with a movable mechanism (more versatile and reliable):
The second [ LUXA2 H2 ] is simpler - a rubber gasket is applied to a part of its body, which holds the phone due to the friction force. Not so reliable, but it works. This is, for example, the HTC HD2:
Also on the site there is a model for mounting in the car, but in reality I have not seen it and can not say anything about it. But I think it will be more pleasantly frankly Chinese fixtures, which are crowded with all the shops and markets.
Well, that’s probably all :) My iPad, but I don’t use any attachment with it - I always wear it in an EeePC case, where it fits perfectly with the documents. But for the phone, something would have to be invented, but it is always incomprehensible where it is lying around. But for a netbook I have been using the Ergotron stand for more than a year now - judging by the number of questions in PM, I’ll have to write about it too.
Thank you for your attention and success!
Source: https://habr.com/ru/post/100009/
All Articles